SA-10H is one 11.2W AC/DC constant current mode single output LED power supply. It accepts input 90-264VAC and provides two models with different output current, 350mA and 700mA, respectively, that the small wattage LED applications employ the most frequently. Exploiting Class II design (without FG pin) and adopting the 94V-0 flame retardant plastic enclosure, SA-10H ideally fits the entry-level LED applications.

Output :

RATED CURRENT: 350mA  / 700mA

LED Operation Voltage: 3-32VDC

RATED POWER: 10.5W  / 11.2W

Input：

Voltage Range  :  90~264VAC       127~370VDC

Frequency Range: 47~63Hz

Protection:

Over Current :  Constant current limiting, recovers automatically after fault condition

Over Voltage :  Shut down and latch off o/p voltage, re-power on to recover

Over Temperature : Shut down o/p voltage, re-power on to recover

Environment :

Working Temperature: -40 ~ +70℃

Woring Humidity : 20 ~ 90% RH non-condensing

Storage Temperature, Humidity : -40 ~ +80℃ , 10 ~ 95% RH

Safety :

Safety Standards : UL62368-1 EAC TP TC 004 , IEC/EN62368-1,IP20  approved

Withstand Voltage : I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC

Isolation Resistance : I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH

EMC Emission :  Compliance to EN55032 (CISPR32) Class B, EN61000-3-2,-3, EAC TP TC 020

EMC Immunity : Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level (surge 6KV), criteria A, EAC TP TC 020

Others:

MTBF :  50Khrs min.      MIL-HDBK-217F (25℃ )